Change Programme - oticon Remote Control 3.0 Instructions For Use Manual

Battery low
If the batteries are running low the status light will blink rapidly
whenever a button is pressed. In this case replace the batteries at
your earliest convenience.
16 About Startup Daily use Warnings More info

Change programme

The remote control can be used to change pro-
gramme if your hearing care professional has made
more than one programme available in your hearing
aids.
Shortly press the "•" button on the remote control
to go through the hearing aid programmes. Each
press will advance the hearing aids to the next
programme in the cycle.
IMPORTANT NOTICE
Please refer to your hearing aid's "Instructions for Use" for details on
the functionality of your specific hearing aid solution.
Press to change
programme
17