Table of Contents
Advertisement
ASSEMBLY
CHECKTIRE
PRESSURE
The tires on your tractor were overinflated at the factory
for shipping purposes.
Correct tire pressure is important
for best cutting performance.
Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS"
section of this manual.
CHECK
DECK
LEVELNESS
For best cutting results, mower housing should be properly
leveled. See"TO LEVEL MOWER HOUSING" in the Service
and Adjustments section of this manual.
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the figures that are shown for replacing motion and
mower blade drive belts in the Service and Adjustments
section of this manual.
Verify that the belts are routed
correctly.
CHECK BRAKE SYSTEM
After you learn howto operate your tractor, checkto seethat
the brake is properly adjusted. See "TO ADJUST BRAKE"
in the Service and Adjustments section of this manual.
#'CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC-
TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE
BEST PERFORMANCEAND
SATISFACTION FROMTHIS
QUALITY PRODUCT
PLEASE REVIEW THE FOLLOWING CHECKLIST:
,/
All assembly instructions have been completed.
,/
No remaining loose parts in carton.
,/
Battery is properly prepared and charged.
(Minimum
1 hour at 6 amps).
,/
Seat is adjusted comfortably and tightened securely.
,/
Alltires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,/
Be sure mower deck is properly leveled side-to-side/
front-to-rear
for best cutting results.
(Tires must be
properly inflated for leveling).
,/
Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
,/
Check wiring. See that all connections are still secure
and wires are properly clamped.
,/
Before driving tractor, be sure freewheel control is in
drive position.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
,I
Engine oil is at proper level.
,/
Fuel tank is fi!led with fresh, clean, regular unleaded
gasolihe.
,f
Become familiar with all controls - their location and
function. Operate them before you start the engine.
4
Be sure brake system is in safe operating condition.
,/
It is important to purge the transmission before oper-
ating your tractor for the first time. Follow proper start-
ing and transmission
purging instructions
(See "TO
START ENGINE" and "PURGE TRANSMISSION"
in
the Operation section of this manual).
8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
