Do you have a question about the PO17542LT and is the answer not in the manual?
Questions and answers
jerry
May 15, 2025
how to change blades
1 comments:
Mr. Anderson
May 22, 2025
To change blades on a Poulan Pro PO17542LT:
1. Remove the mower deck from the tractor (see “TO REMOVE MOWER” in the manual). 2. Remove the mower blade drive belt by working it off both mandrel and idler pulleys. 3. Pull the belt away from the mower. 4. Remove the blade from the mandrel by loosening the bolt holding it. 5. Sharpen or replace the blade as needed. Ensure the blade is balanced before reinstalling. 6. Reinstall the blade and tighten the bolt securely. 7. Reinstall the mower deck and belt.
Use proper safety precautions and do not sharpen the blade while it is still on the mower.
Page 1
MODEL: Read this Man u al and follow all Warnings and Safety Instructions. Fail ure to do so PO17542LT can re sult in serious in ju ry. LAWN TRACTOR ALWAYS WEAR EYE PROTECTION DURING OPERATION Visit our website: www.poulan.com 440607...
Each tractor has its own model number. The model number for your tractor can be found on the fender under the seat. When ordering parts, always give the following information: • Product - “Tractor” • Model Number - “PO17542LT (96012012000)” • Part Number • Part DESCRIPTION TABLE OF CONTENTS SCHEMATIC ........................
LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in mate- rials and work man ship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due to materials or workmanship.
Need help?
Do you have a question about the PO17542LT and is the answer not in the manual?
Questions and answers
how to change blades
To change blades on a Poulan Pro PO17542LT:
1. Remove the mower deck from the tractor (see “TO REMOVE MOWER” in the manual).
2. Remove the mower blade drive belt by working it off both mandrel and idler pulleys.
3. Pull the belt away from the mower.
4. Remove the blade from the mandrel by loosening the bolt holding it.
5. Sharpen or replace the blade as needed. Ensure the blade is balanced before reinstalling.
6. Reinstall the blade and tighten the bolt securely.
7. Reinstall the mower deck and belt.
Use proper safety precautions and do not sharpen the blade while it is still on the mower.
This answer is automatically generated