Table of Contents
Advertisement
CHECKTIRE P RESSURE
The tires onyourtractor w ere overin-
flated atthefactory
f or shipping pur-
poses. Correct tire pressure is important
for best cutting performance.
• Reduce tire pressure to PSi shown in
"PRODUCT SPECIFICATIONS"
section of this manual.
CHECK
FOR PROPER
POSITION
OF ALL BELTS
See the figures that are shown for
replacing motion and mower blade drive
belts in the Service and Adjustments
section of this manual. Verify that the
belts are routed correctly.
CHECK
DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO
LEVEL MOWER HOUSING" in the
Service and Adjustments section of this
manual.
CHECK
BRAKE
SYSTEM
After you learn how to operate your
tractor, check to see that the brake is
properly adjusted, See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this manual.
,/CHECKLIST
BEFORE YOU OPERATE AND ENJOY
YOUR NEW TRACTOR, WE WISH TO
ASSURETHATYOU
RECEIVETHE
BEST
PERFORMANCE
AND SATISFACTION
FROM THIS QUALITY PRODUCT.
PLEASE REVIEWTHE
FOLLOWING
CHECKLIST:
,/All assembly instructions have been
completed.
4 No remaining loose parts in carton.
,/Battery
is properly prepared and
charged.
(Minimum 1 hour at 6 amps).
,/Seat
is adjusted comfortably and
tightened securely.
,/All tires are properly inflated. (For
shipping purposes, the tires were
overinflated at the factory).
,/Be
sure mower deck is properly leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly inflated
for leveling).
,/Check
mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
#" Check wiring.
See that all connections
are still secure and wires are properly
clamped.
WHILE LEARNING HOWTO USE YOUR
TRACTOR, PAY EXTRA ATTENTION TO
THE FOLLOWING IMPORTANT ITEMS:
4" Engine oil is at proper level.
,/Fuel
tank is filled with fresh, clean,
regular unleaded gasoline.
,/Become
familiar with all controls - their
location and function.
Operate them
before you start the engine.
,/Be sure brake system is in safe
operating
condition.
9
Advertisement
Table of Contents
