TDR Spider Instruction Manual page 11

Special operation controls
180° Roll
1. Bring the drone to a mid-air hover without flying towards
any direction.
2. While hovering, short press the MFB once to switch the
360° Rolling mode to 180° Rolling mode.
3. While hovering, press the 360° Roll button. The remote
will start beeping rapidly as the drone will enter rolling-
ready mode.
4. While in the rolling-ready move, tap the direction stick in
the direction you want the drone to flip.
Short press MFB
to switch 360° and
180° Roll Mode
Note:
- Upon performing 180˚ Rolling, direction controls will remain the same.
- In 180˚ Rolling mode, press MFB again to switch back to 360˚ Rolling Mode.
- Every time the drone is powered on, the rolling feature will be reset back to default (360˚
Rolling), and the flying direction will be reset to normal.
11
360° Roll
(default setting)
180° Roll
Forward flip
+
Left
flip
Backward flip
FORWARD
RIGHT
LEFT
BACKWARD
Right
flip