Charging The Battery - Bissell 2003 series User Manual

Charging the Battery

1
Before charging, make sure unit is off by
ensuring the battery status indicator lights
are not illuminated. Insert the charging
adapter plug into the charging port on
the handle near the base of the unit.
NOTE: There is a door covering the
charging port that will automatically
slide out of the way when the charging
adapter is inserted.
IMPORTANT: Before storing unit, ensure dirty water tank is empty. Unit should
not be left on its side with water in the dirty water tank.
Charging Light Display Status
BATTERY STATUS
100%
99% to 66%
65% to 33%
32% to 1%
0%
NOTE: Keep the temperature range of between 40-104°F when charging
battery, storing unit or during use.
NOTE: Use only with charger SIL, Model SSA-100060US..
2
Plug the adapter into a suitable wall
outlet. The battery status indicator lights
will illuminate when charging.
For maximum run time, charge the unit
4 hours prior to use. Refer to the chart
below for understanding the charging
status.
NOTE: On first use, make sure your unit
is fully charged before using it. To check
the battery status, turn the machine ON
by pressing the power button on the
handle. Battery is fully charged when
all three of the blue status lights are
illuminated. See chart below.
LIGHT STATUS
4
www.BISSELL.com
5