Safety Checks - WACKER Group IRFUN 38/115 Operator's Manual

Safety information
2.2.3
2.2.4
2.2.5
2.2.6
2.2.7
2.2.8
2.2.9
2.2.10 When taking a break or when leaving IRFUN, the operator must switch
2.2.11 Do not operate IRFUN in areas where explosions may occur.
2.2.12 Appropriate protective gloves must always be worn when handling
2.2.13 The protective hose must be used to guide the machine during opera-
2.2.14 The transmission of vibration oscillations to the material to be com-
2.3

Safety checks

2.3.1
2.3.2
SV00043en.fm
The machine corresponds to class rating 1 (grounded conductor).
Prior to starting IRFUN, make sure that the components are screwed
on securely.
Do not insert or pull out the power plug as a means of turning IRFUN
on or off.
The power cable of IRFUN must not be used to pull out the plug from
the plug receptacle.
Protect electric cable from heat, oil, and sharp edges.
Electrical equipment and material may only be used if they comply with
operational and local safety requirements. They must be in proper con-
dition and this condition is to be maintained.
Activated IRFUNs should not come into contact with any solid objects
over a long period of time, long running times in the air must be avoid-
ed.
off the machine and park it securely in such a way to ensure that it can-
not tip over or fall down.
IRFUN. Do not touch the hot vibrator head.
tion. Using the vibrator head to guide the IRFUN can cause vascular
diseases.
pacted can damage or destroy the casing. Casings must be secured
according to regulations before using the machine.
Before starting operation, the operator has to check that all control and
safety devices are functioning properly.
Prior to connecting the machine, check the electric cable and socket
for damage on a regular basis.
6
Internal vibrators