Maintenance - WACKER Group IRFUN 38/115 Operator's Manual

Description/maintenance
6.4

Maintenance

6.4.1
∗
∗
∗
6.4.2
T01036en.fm
When the wear dimension has been reached the corresponding parts
must be replaced. Seal the housing components at the connection with
ergo 4205 and protect against removal by spot welding.
for IR... 30:
Completely replace the vibrator head.
for IR... 38/45/57:
Connecting lines between hose connection and vibrator head:
The closure of the spade connector (1) must be ensured using the
shrink-on tubing (2). See illustration.
for IR... 65:
Connect connecting cables by crimping them to both sides of the butt
connectors.
After opening the vibrator head the correct oil level must be ensured
prior to assembly (see technical data).
22