Problem With The Link Status - ZyXEL Communications ZYAIR G-200 User Manual

ZyAIR G-200 User's Guide
PROBLEM
A. Infrastructure
B. Ad-Hoc (IBSS)
4.3

Problem with the Link Status

PROBLEM
The link quality and/or signal
strength is poor all the time.
4-2
Table 4-2 Troubleshooting Communication Problems
Make sure that the AP and the associated computers are turned on and
working properly.
Make sure the ZyAIR and the associated AP use the same SSID.
Change the AP and the associated wireless clients to use another radio
channel if interference is high.
Make sure that the computer and the AP share the same security option
and key. Verify the settings in the Encryption screen.
Verify that the peer computer(s) is turned on.
Make sure the ZyAIR and the peer computer(s) are using the same SS ID
and channel.
Make sure that the ZyAIR and the peer computer(s) share the same
security option and key.
Change the wireless clients to use another radio channel if interference is
high.
Make sure that the ZyAIR and the peer computer(s) share the same
security option and key. Verify the settings in the Encryption screen.
Table 4-3 Troubleshooting Link Quality
Search and connect to another AP with a better link quality using the Site
Survey screen.
Move your computer closer to the AP or the peer computer(s) within the
transmission range.
There is too much radio interference (for example microwave or another
AP using the same channel) around your wireless network. Relocate or
reduce the radio interference.
CORRECTIVE ACTION
CORRECTIVE ACTION
Troubleshooting