ZyXEL Communications ZYAIR G-200 User Manual page 32

ZyAIR G-200 User's Guide
FIELD
Passphrase
Manual Key
ASCII
Key 1 ... 4
Default Tx Key
Restore Default
Undo Changes
Apply Changes
2-12
Table 2-4 Encryption
Enter the passphrase when you select the Create with Passphrase option. As you
enter the passphrase, the ZyAIR automatically generates four different WEP keys
and displays them in the key fields below. Write down the automatically generated
WEP keys and use them to manually set the WEP keys in other WLAN adapters.
Passphrase is case-sensitive. You must use the same passphrase for all wireless
LAN adapters with this feature in the same WLAN.
Select this option if you want to manually enter the WEP keys. Then select a default
WEP key to use for data encryption.
Select this check box to enter the WEP keys as ASCII characters.
Clear this check box to enter the WEP keys as hexadecimal characters.
Enter the WEP keys in the fields provided.
If you select 64 Bits in the Encryption (WEP) field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (e.g.
11AA22BB33) for hexadecimal key type
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-
9" (e.g. MyKey) for ASCII key type.
If you select 128 Bits in the Encryption (WEP) field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 00112233445566778899AABBCC) for hexadecimal key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-
9" (for example, MyKey12345678) for ASCII key type.
You must configure all four WEP keys the first time you use
ASCII WEP keys are case sensitive.
Select a default key from the drop-down list box.
Click Restore Default to clear the settings in all fields in this screen.
Click Undo Changes to start configuring the fields again.
Click Apply Changes to save the changes back to ZyAIR.
DESCRIPTION
the ZyAIR.
Using the ZyAIR Utility