Attaching Upper Tether Straps - Tesla Model 3 Owner's Manual

Install LATCH child safety seats in the
outboard seating positions only. Use only a
seat belt retained seat in the center position.
To install a LATCH child safety seat, slide the
safety seat latches onto the anchor bars until
they click into place. Carefully read and follow
the instructions provided by the child safety
seat manufacturer.
Seating and Safety Restraints
Child Safety Seats
Once installed, test the security of the
installation before seating a child. Attempt to
twist the child safety seat from side to side
and try to pull it away from the seat, then
check to ensure the anchors remain securely
in place.
Note: Lower LATCH anchors should not be
used with child seats or booster seats that
have an integrated safety belt in situations
where the combined weight of the child plus
the child restraint is more than 65 lbs (29 kg).
In these situations, use the safety belt instead.

Attaching Upper Tether Straps

If an upper tether strap is provided, attach its
hook to the anchor point located on the shelf
behind the rear seating positions.
Warning: Tighten upper tether straps
according to the instructions provided by
the manufacturer of the child safety seat.
Warning: USE ONLY SEAT BELT
RETAINED CHILD SAFETY SEATS IN THE
CENTER SEATING POSITION.
To access an anchor point, press down on the
back of its cover.
27