Autopark - Tesla Model 3 Owner's Manual

Autopark

If you have purchased the optional Enhanced
Autopilot or Full Self-Driving Capability
package, Autopark uses data from ultrasonic
sensors and the Global Positioning System
(GPS) to:
• Simplify parking on public roads by
maneuvering Model 3 into parallel and
perpendicularparking spaces. See
on Public Roads
• Automatically park and retrieve Model 3
from outside the vehicle on a private
residential property. See
on page 70.
Warning: Summon is a BETA feature.
Please use this feature with caution,
staying prepared to take immediate
action at any time.
Warning: Autopark's performance
depends on the ability of the ultrasonic
sensors to determine the vehicle's
proximity to curbs, objects, and other
vehicles.
68
Parking
on page 68.
Using Summon
Parking on Public Roads
When driving, follow these steps to allow
Autopark to maneuver Model 3 into a parking
space:
1. When driving slowly on a public road,
monitor the touchscreen to determine
when Autopark has detected a parking
space. When Autopark detects a potential
parking space, the touchscreen displays
an icon. Autopark detects parallel parking
locations when driving below 15 mph (24
km/h) and perpendicular parking
locations when driving below 10 mph (16
km/h).
Note: The parking icon appears only if the
vehicle's position and/or the
circumstances of the surrounding area are
such that Autopark can determine an
appropriate driving path. If Autopark
cannot determine an appropriate path (for
example, when driving on a narrow street
where moving into the parking space
causes the front of the vehicle to extend
into the adjacent lane), you can either
reposition the vehicle, find a different
parking space, or park manually.
2. Check to determine if the detected
parking space is appropriate and safe. If
so, pull forward and stop approximately a
car length ahead of the parking space (as
you normally would when parallel parking
or when backing into a perpendicular
parking space).
3. Release the steering wheel, shift Model 3
into Reverse, then touch Start Autopark
on the touchscreen.
4. When parking is complete, Autopark
displays the "Complete" message.
In situations where Autopark cannot operate
due to inadequate sensor data, the
touchscreen displays a message indicating
that you must manually park Model 3.
Note: If you press the brake when Autopark is
actively parking Model 3, the parking process
pauses until you touch Resume on the
touchscreen.
Note: Autopark detects potential
perpendicular parking spaces that are at least
9.5 feet (2.9 meters) wide with a vehicle
Model 3 Owner's Manual