Pairing With A Bluetooth Device - Yamaha HPH-W300 Owner's Manual

Pairing with a Bluetooth device

"Pairing" is the process of registering Bluetooth devices each other. Pairing must be per-
formed when you use a Bluetooth connection for the first time, or if the pairing data has been
deleted.
HPH-W300
Bluetooth button
2
1 Turning on the headphones.
2 Press and hold the Bluetooth button until the indicator flashes in blue and orange
alternately. (more than three seconds)
The headphones are waiting for pairing.
3 Perform the pairing process on the Bluetooth device.
For details, refer to the owner's manual of the Bluetooth device.
3-1. Access the Bluetooth setting screen on the Bluetooth device.
3-2. If the Bluetooth setting is disabled, enable it.
3-3. In the list of detected devices, tap "HPH-W300 Yamaha" to select it.
Pairing is completed.
When pairing is completed, the indicator lights in blue for twenty seconds.
Note
• These headphones can be paired with up to eight Bluetooth devices. When pairing has suc-
ceeded with the ninth device, pairing data is deleted for the oldest paired device.
• If two minutes elapse before pairing is completed, the headphone stop waiting for pairing.
• If you are asked to enter a pass key, enter the numerals "0000."
Bluetooth
1
EN 8
Bluetooth device