Huffy GREEN MACHINE Owner's Manual page 12

Attaching Steering Linkage:
F
E
D
C
STEP 1
(Note: Steering Rods are marked
A
1. Insert FRONT End of Right Steering Rod
B
as shown on right side of unit.
2. Make sure Rods are on the OUTSIDE of the Steering Rods (as shown) and the back of
C
Rods are pointing UP .
3. Insert Threaded Steering Rod End
E
4. Install Washer and Locknut
engaged in Locknut.
5. Repeat for opposite side.
Install Rear Axle Cowling:
STEPS:
A
1. Install each Foot Peg by inserting into Frame
B
Mount as shown until mounting holes line up.
C
2. Insert Shoulder Screw from TOP.
D
3. Install threaded Screw from bottom.
4. Tighten securely.
5. Repeat for opposite side.
12
FORWARD
L
R
A
R L
and ):
R
into right Steering Rod Handle End
C D
up into rear axle Steering Plate
F
. Tighten securely making sure threads are fully
C
A
B
Tires: Accessing the Filler Valve
C
B
Steps to access Filler Valve:
• Remove Cover
• When Tire is properly infl ated, replace Cover and Screw - NOTE: Fit Cover Tabs
UNDER Left Wheel Cowling.
.
5mm
A
A B
by removing Screw to access Filler Valve
D
B
C
.
D
21