RCA LGB116 Use And Care & Installation page 35

I
Stand-By Pilot Flame
Heater Pilot Flame
4. Turn the OVEN
CONTROL knob to a setting
above 200°I? The pilot flame will increase in size
and impinge on the temperatweresponse element.
The oven burner will light in 30-90 seconds.
The oven burner will operate until the set
temperature is reached. The oven burner will
continue to cycle on and off as necessary to
maintain the oven at the temperature indicated
by the OVEN CONTROL knob.
CHECK }6HmOH OFSURFACE BURNERS
SurfacO Mrnsr @tiOa
Operation of all cooktop and oven burners
should be checked after the pilots have been
lighted (on some models) and range and gas
supply lines have been carefully checked for leaks.
Standing
Pilot Models
Select atop burner knob and simultaneously push
in and turn to HI position. The burner should
light within a few seconds. Try each burner in
succession until all burners have been checked.
Electric Ignition Models
Select atop burner knob and simultaneously
push in and turn to LITE position. You will hear a
snappin sound indicatin proper operation of
i 1!
the spar module. Once e air has been pur ed
&n from the supply lines, burners should light wi "
4 seconds. Afterburner lights, rotate knob out of
the LI'113 position. Try each burner in succession
until all burners have been checked.
Qwr~
of
Flames
The combustion quality of burner flames needs
to be determined visually.
(A) Yellow fla.mes-
Call for service
(B) Yellow
tips on
outer cones-
Normal for
LP gas
(C) Soft
blue flames-
Normal for natural gas
If burner flames look like (A), call for service.
Normal burner flames should look like
(B) or
(C), depending on the type of gas you use.
With LP gas, some yellow tipping on outer
cones is normal.
cHKK 16NITiOHOFOVENBURNER
Your oven is designed to operate quietly and
automatically.To operate
the
oven, turn the OVEN
CONTROL knob to a setting above 20001?After
30-90seconds, the oven burner will ignite and
burn until the set temperature is reached. The
oven burner will continue to cycle on and off as
necessary to maintain the oven at the temperature
indicated by the OVEN CONTROL knob.
Electric ignition models require electrical
power to operate. The oven cannot be lit during a
g
ower outage. Gas will not flow unless the glow
ar is hot
If the oven is in use when a power outage occurs,
the burner will shut off and cannot be x-e-lituntil
power is restored.
(continued next page)
35