Download Print this page

Saito Victoria Assembling Instructions page 31

Paddle steamer

Advertisement

NO 29
WARNING (For operation of the steam engine)
● Make sure to close the lid of the bottle containing alcohol after feeding fuel into the burner.
Never leave the bottle near the burner.
● DO NOT look into the engine, boiler, burner, and smokestack from above during operation. They might blow off steam suddenly.
● Never touch the screw, paddle wheel during operation.
● Starting running by hand is very dangerous. Never do that.
● After the operation, the engine, boiler, and burner are very hot so do not touch them until they cool down to avoid scald.
● Do not use the engine, boiler, and burner for the purpose besides for model ships.
● Please be advised that we assume no responsibility whatsoever for any damages resulting from the use of the products.
Disclaimer
All the steam engine, boiler and burner made in our factory are operated by means of steam generated by flame. When you use them,
take a special care of fire or burn injury. We assume no responsibility whatsoever for any accidents or damages.
Wrong usages which will be not included in the warranty are as follows.
● Defect caused by using the undesignated liquid. (other than Water for the boiler, Alcohol for the burner)
● Defect caused by unrequited modification.
● Defect caused by usage beside the procedure described in this instructions.
All specifications and models are subject to change without notice.
SAITO SEISAKUSHO CO., LTD.
22-7, 3-chome, Tokagi, Ichikawa-shi, Chiba 272-0024, Japan
TEL : 047-378-4156
FAX : 047-378-4155
1 Instant adhesive 2 5-minute Epoxy adhesive 3 30-minute Epoxy adhesive 4 6-hour Epoxy adhesive

Advertisement

loading