ASSEMBLING 16
Search light
Bend to
shape
Make the edge round
Balsa triangular
material
Search light
Cut off the hatching parts
1 Instant adhesive 2 5-minute Epoxy adhesive 3 30-minute Epoxy adhesive 4 6-hour Epoxy adhesive
● Glue the bridges
,
, and
● Glue balsa triangular material on the corners using
● After drying, make the corners rounded (approx. R13). after
that, cut openings for the windows at the rounded corners.
● Finally, glue the roof
using
● For the bridge, use the window frames W1 and W3 partly cut
as the drawing shows.
※When cut the hatching parts of W
a nipper to avoid any distortion of the material.
● Make 4 pcs. of the search light referring to the drawing. Paste
2pcs. to the roof of the bridge in the position drawing shows.
※Pasting the search lights can be done later.
Search light
(head of a pin)
Cut off the
hatching part
Cut off the hatching part
and bend roundly
and combine
using
,
.
,
referring to the drawing.
and W
, use a hand saw not
1
3
Door knob
NO 17
,
.