Advertisement
ASSEMBLING 7
Set screw
● To assemble the paddle wheel, first put the flange P
● Set 4 the assembled wheels aligned as the drawing shows (set each 2
Hexagon
● Next, insert the fins into the grooves of the wheels. Make sure not to
screw
● Once set the wheels and fins precisely, and make length of either side
Nut
● Glue 61 and 62 using 3 .
● For basecoat and water resistant, the paddle must be clear painted
Flange
Shaft
1 Instant adhesive 2 5-minute Epoxy adhesive 3 30-minute Epoxy adhesive 4 6-hour Epoxy adhesive
61 , and fix them by hexagon bolts and nuts.
pcs. to same direction.), then put the shaft P1 through those wheels
and fix them briefly by the set screws.
distort the balance of whole wheels.
of the shaft equal, then tighten each set screws.
before assembling.
NO 8
into the wheel
2
Advertisement
