Maintenance; Battery; Recharging The Battery - Active Care Medical TD-4121 Owner's Manual

NOTE:
If using the meter for the first time, You will find ""Empty" showing on the display,
indicating that there is no test result in the memory.

MAINTENANCE

Battery

Your meter comes with one 3.7V Li-Polymer rechargeable battery.
Please recharge the meter if the battery icon on the upper right flickers. That
means the battery is low.
The meter will shut down immediately once the battery is dead.

Recharging the Battery

There are 2 ways to charge the internal battery in your meter:

Plug the meter into a powered-on computer or laptop with a Micro-USB cable.

Use an AC power adapter. Plug the meter into a wall outlet to initiate the
charging process.
The battery charging indication will light red when charging is in process. When
the indicator light green, it means the battery is full. You may now remove the USB
cable.
You may also refer to the battery icon on the upper right for the capacity of the
battery.
NOTE:
 Recharging the battery affects neither the test result stored in the memory, nor
the functions other than glucose measuring.
 Measuring during battery recharging is prohibited.
 The AC power adapter and the micro-USB cable may not come with the kit.
They may be purchased separately. It is recommended to use the AC adapter
of MEAN WELL (Model No.: GSM06E05-TD) which provides 6 Watts of
continuous output power. The wide operating voltage is 100 to 240 VAC, 47 to
63 Hz.
33