Active Care Medical TD-4121 Owner's Manual page 31

6. Data Transmission
The measuring data will be uploaded to the server after every measurement,
providing that the meter's GPRS is in service.
If GPRS is not in service or connection fails, the measurement data will be
stored in the memory and waited to be uploaded at 6 o'clock every morning.
7. Tap on or press home button to exit and back to the main page.
8. Eject the used test strip and remove the lancet
9. Eject the test strip by sliding up the eject button on the side. Use a sharp bin
to dispose of used test strips.
NOTE:
 Do not press the punctured site against the test strip or try to smear the blood.
 If you do not apply a blood sample to the test strip within 10 minutes, the meter
will automatically turn into the halt state. You must remove and reinsert the test
strip to start a new test.
 Do not leave the absorbent hole until the confirmation window is filled with
blood.
 NEVER try to add more blood to the test strip after the drop of blood has moved
away. Discard the used test strip and retest with a new one.
 If you have trouble filling the confirmation window, please contact your health
care professional or the local customer service for assistance.
Always follow the instructions in the lancing device insert when removing
the lancet.
31