Introduction; What's In The Box; Place Your Soundbar; Place The Soundbar On The Table - JBL BAR STUDIO Owner's Manual

1. INTRODUCTION

Thank you for purchasing the JBL BAR STUDIO. The JBL BAR
STUDIO is designed to bring an extraordinary sound experience
to your home entertainment system. We urge you to take a few
minutes to read through this manual, which describes the product
and includes step-by-step instructions to help you set up and get
started.
CONTACT US: If you have any questions about JBL BAR
STUDIO, its installation or its operation, please contact
your retailer or custom installer, or visit our website at:
www.JBL.com.

2. WHAT'S IN THE BOX

Soundbar
Remote Control
Battery size of remote control: CR2025
Power Adaptor
(4ft, 1200mm)
Power Cables*
(5ft, 1500mm)
*Power cable types and numbers varied by regions
Optical Cable
(4ft, 1200mm)
AUX cable
(4ft, 1200mm)
Wall Mount Brackets
Product Information & Wall-mounted guide

3. PLACE YOUR SOUNDBAR

3a. Place the Soundbar on the table
x1
3b. Wall mount the Soundbar
Use tape to stick the wall-mounted paper guide on the wall, push
a pen tip through the center of each mounting hole to mark the
wall-mounted bracket location and remove the paper.
x1
x1
x1
Screw the wall mount brackets on the pen mark; screw the
threaded mounting post into the back of the soundbar; then hook
the soundbar on the wall.
x1
x1
x1
x1
3
www.jbl.com