Settings; Password Entry; Setting The Protective Parameters - Sungrow eShow User Manual

2 LCD Operation
2.10

Settings

Main Screen (Press )→Menu (Touch ×5)→Set-param (Press )

2.10.1 Password Entry

Set-parameter setting is password-protected. To set the parameters, you should
input the correct password.
A password confirmation screen will occur.
Step 1

Touch to move cursor right and touch

to input the password 111111.

Press to confirm the password and enter
Step 2
the "Set-param" submenu.

2.10.2 Setting the Protective Parameters

Protective parameters are designed for the threshold values that can trigger the
protection function of the inverter.
The single-stage
parameter setting interface will appear.
Single-stage Protection Parameter Setting:

Touch to select parameter, touch
cursor and touch
Confirm settings by pressing .
14
and multi-stage


to set the appropriate value.
protection
to move the
User Manual