Removing The Optical-Drive Connector Board; Prerequisites; Procedure - Dell Inspiron 5570 Service Manual

Removing the optical-drive
connector board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the optical drive
2 Remove the base

Procedure

NOTE: Applicable only for computers that are shipped with optical drive.
1 Lift the latch and disconnect the optical-drive connector-board cable from the
system board.
2 Remove the screw (M2x2) that secures the optical-drive connector board to the
palm rest and keyboard assembly.
computer. After working inside your computer, follow
After working inside your
(optional).
cover.
computer. For more safety best
www.dell.com/
Before
41