Table of Contents
Advertisement
Responsiveness
Logging Capacity
Recording Interval
Recording Mode
LCD Display Items
Communication
Interfaces
Communication Time
Power
Battery Life (*4)
Dimensions
Weight
Operating Environment
Software
Compatible OS
(*5)
Display Languages (*6) English
*1: When used in environments where temperature and humidity are over the values of 50°C
75%, 60°C 50%, 70°C 35%, and 80°C 25%, sensor hysteresis may fluctuate by values greater
than ±1.5%RH. Under certain circumstances, it may take some time to return to normal
measurement capability.
*2: Compared to the value measured by the T&D standard sensor for calibration under our
calibration light source.
*3: Customers wishing to write their own software, please contact your local distributor for the serial
communications protocol specifications. (Note: Optional serial communication cable TR-07C is
also required.)
*4: Battery life varies depending upon the ambient temperature in which it is used, the recording
interval, the frequency of communication, and the battery performance. All estimates are based
on operations carried out with a new battery and are in no way a guarantee of actual battery
life. When infrared communication function is enabled, battery life may be shortened if the unit
is used under the inverter type fluorescent lighting.
*5: For installation, it is necessary to have Administrator (Computer Administrator) rights.
*6: We recommend using an operating system in the same language as the display language.
Operation in different languages is not guaranteed.
The specifications listed above are subject to change without notice.
Response Time (90%):
3 sec. (at recording interval of 1 sec.)
6 sec. (at other intervals)
8,000 data sets (One data set consists of readings for all channels in
that type of unit.)
Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20,
30, 60 min.
Endless (Overwrite oldest data when capacity is full) or One Time (Stop
recording when capacity is full)
Measurements, Battery Life Warning, etc.
- Measurements: Illuminance / UV Intensity / Temperature / Humidity
/ Cumulative Illuminance / Cumulative amount of UV Light
- Display Pattern: Alternating or Fixed display
- Display Digits: Up to 4 digits
USB Communication, Serial Communication (RS-232C) (*3), Infrared
Communication (IrPHY 1.2 low power)
Downloading time for one unit at full capacity
- Via USB communication: approx. 45 sec.
- Via infrared communication: approx. 60 to 80 sec.
AA Alkaline Battery (LR6) x 1
Approx. 6 months
H 55 mm x W 78 mm x D 18 mm
Approx. 40 g
Temperature: -10 to 60 °C
Humidity: 90 %RH or less (no condensation)
Illuminance UV Recorder for Windows
Microsoft Windows 10 32 / 64 bit
Microsoft Windows 8 32 / 64 bit
Microsoft Windows 7 32 / 64 bit
Microsoft Windows Vista 32 bit (SP1 or later)
29
Advertisement
Table of Contents
