Advertisement
LGIC
Stand-by Status Menu Set-up and Its Functions
Cion Secretary [Menu + 1]
1.
* Telephone Directory / Scheduler / Alarm / Call Reserve / World Time
1.1 Contact Secretary [Menu + 1 + 1 ]
1.1.1 Telephone Directory Register [Menu + 1 + 1 + 1 ]
1.1.2 Telephone Directory Search [Menu + 1 + 1 + 2 ]
1.1.3 Telephone Directory Delete [Menu + 1 + 1 + 3 ]
See the manual on the telephone directory function.
-
1.2 Schedule Management Secretary [Menu + 1 + 2 ]
- See the manual on the diary function
1.3 Alarm Secretary [Menu + 1 + 3 ]
Alarm Time
* User can set an alarm to the desired time.
l
Select Menu + 5 + 1.
l
Select one of ' Release / Once / Daily' .
l
If you select ' Release' , it becomes the state of stand-by. In case an alarm time was set previously,
that setting time will be deleted.
l
When ' Once / Daily' is selected, you just enter the alarm time in the order of hour and minute.
l
In case the alarm time has been set already, the set alarm time and the soft keys of EDIT/OK are
displayed.
- If you select EDIT here, the soft key 1 of EDIT is displayed in ' AM' or ' PM" mode for editing the
input.
l
' AM' and ' PM' mode can be switched with Soft Key1[AM/PM]
l
You can edit the entered contents using DEL key.
l
Press OK key to store the entered alarm time.
¢ Ñ Note: The alarm bell is triggered at the set alarm time with the message of " Alarming Now"
displayed on the display.
¢ Ñ Note: In case ' Once' is selected, if the END key is pressed or 1minute is passed, the alarm time is
deleted.
Terminal Development Center
2
Advertisement
