Advertisement
LGIC
¢ Ñ As NAM#1 ~ NAM#4 have different NAM parameters respectively, if you select the NAM that is
not identified with the subscribed number, the service is not provided.
9.2 AUTO NAM Setup [Menu + 0 + 000000 + 2]
It is the function to automatically set the NAM that is identified with the subscribed number when more
than one NAM are used.
l
Select ' Menu + 0 + 000000 + 2' .
l
Select ' Setup' of ' Setup/Release' using the next setup key (Soft Key1) or ' V/#' key and press
STORE key.
9.3 Field Service [Menu + 0 + 000000 + 3 ]
* Used for the call test of the PHONE, check of the phone status, verification of the error list and the
deletion of the error list.
9.3.1 Test Screen [Menu + 0 + 000000 + 3 + 1]
* As the function capable of checking the status of the phone, this performs to verify the status of the
current reception task, RX AGC VALUE, TX GAIN, PN OFFSET and PILOT ACTIVE.
l
Select ' Menu + 0 + 000000 + 3 + 1'
¢ Ñ First LINE
1 ~ 3 : PN OFFSET / 5 : Status of Reception TASK / 7 ~ 8 : RX AGC VALUE
¢ Ñ Second LINE
1 : No meaning / 3 : Status of PILOT ACTIVE
9.3.2 Test Call [Menu + 0 + 000000 + 3 + 2 ]
* It can make test of 8K / 13K Markov and loopback.
l
Select ' Menu + 0 + 000000 + 3 + 2'
l
Select one of OLD8K Markov / NEW8K Markov / 8K loopback / NEW13K Markov / 13K
loopbacks using */# key and press STORE key. You can verify the call operation under the
selected status.
9.3.3 Error Delete [Menu + 0 + 000000 + 3 + 3]
* Function used to delete the entities stored in the error list.
/ 7 ~ 8 : TX GAIN VALUE
Terminal Development Center
12
Advertisement
