Advertisement
LGIC
l
Select ' Menu + 0 + 000000 + 3 + 3' .
l
Select ' Yes' of ' Yes/No' using the next setup key (Soft Key1) or ' V/#' key and press STORE
key.
At this moment, a message of " Please, wait" appears and once the deletion is completed, it
returns to the previous status.
9.3.4 Error List [Menu + 0 + 000000 + 3 + 4]
* Function used to verify the entities stored in the error list.
l
Select ' Menu + 0 + 000000 + 3 + 4'
l
You can verify 20 lists of error using the next setup key (Soft Key1) or V/# key.
End => It returns to the stand-by status
Del => It returns to the previous state
9.4 Mode Select [Menu + 0 + 000000 + 4]
* Select the mode to use of CDMA / FM
l
Select ' Menu + 0 + 000000 + 4'
Select one of ' CDMAonly / ' CDMA/Analog' / ' Analog/CDMA' / ' Analog only' using the next setup key
(Soft Key1) or */# key and press STORE key..
9.5 System Select [Menu + 0 + 000000 + 5]
* Function used to select the system to be used.
l
Select ' Menu + 0 + 000000 + 5'
Select one of A System / ' A/B System' / B System / ' B/A System' / HOME System / Standard System
using the next setup key (Soft Key1) or V/# key and press STORE key.
9.6 Service Setup [Menu + 0 + 000000 + 6]
* You can select NAM#1 ~ NAM#4 parameters.
l
Select ' Menu + 0 + 000000 + 6' .
NAM#1 parameters are appeared as follows and you can edit the editable items.
PHONE MODEL / SLOT CYCLE INDEX [Editable] / PHONE NUMBER [Editable] / NAM NAME
[Editable]
OK => To store the contents and go to the next step. (Other keys lead to the end stage)
Terminal Development Center
13
Advertisement
