Advertisement
LGIC
l
If you press Further Edit key from the message of ' NAM1 Basic Program Edit End' , the currently
used SERVICE CODE is appeared and you can edit the SERVICE CODE.
Following parameters can be edited.
Changeable Parameter Lists [NAM#1 ~ NAN#4]
NAM1 MOBILE COUNTY CODE /NAM1 MOBILE NETWORK CODE / NAM1 CDMA SID1~4 / NAM1
CDMA NID1 ~4/ NAM1 SYTEM A~B PRAMARY CHAN / NAM1 SYTEM A ~B SECONDARY CHAN .
1. Latest Call List [Search + 1]
* Used to verify the list of 10 telephone numbers that were connected lately.
l
Select ' Search + 1' [Latest call list appears]
Call => Originating
End => It returns to the stand-by status
Del => It returns to Stand-by status/Previous status
View => It returns to detailed information display status
[Function of Keys of Detailed Information Display]
Call => Originating.
Num => Enter into PREPEND status [Originating only possible, storing disabled]
Store => Same as the storing procedure of telephone number
Del => Returns to the previous status
End => Returns to the stand-by status
2. Directory Search [Search + 2]
* Function to search the memorized telephone numbers using the memory address.
See the manual on PIM function.
3. Stored Voice List [Search + 3]
* Function to search the telephone lists only that store voice.
l
Select ' Search + 3'
Further procedures are the same as those for the above-mentioned search of the address list.
Using Search Menu
14
Terminal Development Center
Advertisement
