Related Manuals for LG myTouch Q
Summary of Contents for LG myTouch Q
- Page 1 LGC800F Operator’ s Guide February 26, 1999 Terminal Research Institute Software Development Sector Chan-yong Park...
- Page 2 LGIC Call Status Functions Memo (Menu + 1) Soft Key 1 * Function to store a telephone number while calling Select Menu + 1 and enter the telephone number to store. Press Store (Soft Key 2) key. (Name is not stored) Record While Calling (Menu + 2) Soft Key 1...
- Page 3 LGIC Stand-by Status Menu Set-up and Its Functions Cion Secretary [Menu + 1] * Telephone Directory / Scheduler / Alarm / Call Reserve / World Time 1.1 Contact Secretary [Menu + 1 + 1 ] 1.1.1 Telephone Directory Register [Menu + 1 + 1 + 1 ] 1.1.2 Telephone Directory Search [Menu + 1 + 1 + 2 ] 1.1.3 Telephone Directory Delete [Menu + 1 + 1 + 3 ] See the manual on the telephone directory function.
- Page 4 LGIC 1.4 Call Reservation Secretary [Menu + 1 + 4 ] Call Reserve * Function to originate a call to the reserved number automatically at the reserved time. Select Menu + 5+ 2. Enter the reservation time in the order of “ Hour : Minute” . ‘...
- Page 5 LGIC Select the volume using the next setup key (Soft Key 1). Select the volume you want using V/# keys. Store the selected volume using the selection key. 2.2 Key Tone Volume Control [4-step + Mute] Select Menu + 1 + 2. Select the volume using the next setup key (Soft Key 1).
- Page 6 LGIC 4. Call Time [Menu + 4] * Function to verify the record on the call time 4.1 Last Call Time * Function to show the last call time Select Menu + 4 + 1. Press OK key to return to the stand-by state. 4.2 Total Call Time * Function to show the number of call and the call time for all calls of receiving and transmitting.
- Page 7 LGIC If you try to call in this case, you are prompted for the password and if the entered password is identified, the call is established. In the lock mode, if you press [Locking Release] button, the locking on the [Select] key is released and the [Locking Release] button is changed to [Select] button.
- Page 8 LGIC Select Menu + 6 + Password 4-digit + 5. If the telephone number stored in the telephone number 1is appeared empty, a message of ‘ None’ appears. Select the memory address where you want to make input using the next setup key (Soft Key1) or ‘...
-
Page 9: Convenient Functions
LGIC 6. Convenient Functions * Area code input/setup, automatic reception, calculator, voice recognition setup, automatic answer functions can be set. 6.1 Automatic Area Code * The stored area code is added to the dial number automatically while a call is originated. Select Menu + 6 + 1. - Page 10 LGIC If you want to make other operation on the operation result onward, press other operator than [ = ] and press STORE key to make continuous operation. If the operation result exceeds 9 digits including the decimal point, error message appears and it returns to the initial status of the calculator.
- Page 11 LGIC Select one of ‘ Always Off / Flip Open / 10 Sec. / Auto’ using the next setup (Soft Key1) or ‘ V/#’ key. Press OK to store the selected value. ¢ Ñ Following values can be set. Always Off: Background illumination is always off. 10 Sec.: Background illumination is on for 10 seconds.
- Page 12 LGIC Fax Communication: You select this mode when you receive a fax from your counterpart. 8. Audible Alert Setup [Menu + 8] Three types of audible alert are provided. 8.1 Call Connect Alert * An alert to notify of the state of the call connection while a call is originated. Select ‘...
- Page 13 LGIC ¢ Ñ As NAM#1 ~ NAM#4 have different NAM parameters respectively, if you select the NAM that is not identified with the subscribed number, the service is not provided. 9.2 AUTO NAM Setup [Menu + 0 + 000000 + 2] It is the function to automatically set the NAM that is identified with the subscribed number when more than one NAM are used.
- Page 14 LGIC Select ‘ Menu + 0 + 000000 + 3 + 3’ . Select ‘ Yes’ of ‘ Yes/No’ using the next setup key (Soft Key1) or ‘ V/#’ key and press STORE key. At this moment, a message of “ Please, wait” appears and once the deletion is completed, it returns to the previous status.
- Page 15 LGIC If you press Further Edit key from the message of ‘ NAM1 Basic Program Edit End’ , the currently used SERVICE CODE is appeared and you can edit the SERVICE CODE. Following parameters can be edited. Changeable Parameter Lists [NAM#1 ~ NAN#4] NAM1 MOBILE COUNTY CODE /NAM1 MOBILE NETWORK CODE / NAM1 CDMA SID1~4 / NAM1 CDMA NID1 ~4/ NAM1 SYTEM A~B PRAMARY CHAN / NAM1 SYTEM A ~B SECONDARY CHAN .
-
Page 16: Other Function Keys
LGIC 4. Schedule Search [Search + 4] * Function to search user’ s schedule and its details using the scheduler. Select ‘ Search + 4’ . - See the description of the diary function. 5. Self Number Search [Search + 5] * Function to verify her/his phone number. - Page 17 LGIC Annex 2 : Voice Recognition Function Terminal Development Center...
- Page 18 LGIC 1. Using Voice Recognition Function For using the voice recognition dialing function, there should be a voice available that was previously stored in the memory through the voice learning process. And the voice recognition function should be set through ‘ Menu 6 + 5’ 1) Voice Learning l This function is performed following the procedures for the conventional telephone number storing.
- Page 19 LGIC “ Your name again, please “ Enter your name in voice again “ If the data you have input so far are correct, select ‘ Yes’ , otherwise, select ‘ No’ Correct? (If the data you have input so far are correct, select ‘ Yes’ , otherwise, select ‘ No’ ) 2) Voice Dialing l This function is performed in the idle state by pressing DEL key and its procedures are as follows.
- Page 20 LGIC Annex3: Automatic Answer Function Terminal Development Center...
- Page 21 LGIC Automatic Answer Function 1. What is Automatic Answer Function? It is a function to store the conversation message of the counterpart through the automatic answering by the terminal when there is a call. 2. Operation Concept (1) Once the automatic answering function has been set, a message of ‘...
- Page 22 LGIC As a function to set the automatic answering mode, it can be set to “ Setup/Release” mode and its default is “ Release” . (2) Message Retrieve (Menu 6 + 5 + 2) You can retrieve the recorded message of your counterpart while calling. (3) Message Delete (Menu 6 + 5 + 3) Function to delete the recorded message.
- Page 23 LGIC Hold-on Function What is Hold-on function? It is also called “ Reception Hold Message Transmission Function” . If there is a call while you are occupied with some urgent matters, you can release the message of [Sorry but hold on, please and I get back to you shortly…...