Advertisement
Quick Links
Advertisement
Related Manuals for DPA d:fine
Summary of Contents for DPA d:fine
- Page 1 Headset & Earset Microphones Manual d p a m i c r o p h o n e s . c o m / d f i n e...
- Page 2 • The positioning of mic with omni characteristics is less critical than with of your d:fine Headset Microphone, please follow the simple instructions below. directional • An omnidirectional microphone is generally not very sensitive to wind,...
- Page 3 How to tell the difference between d:fine Headset Microphone capsules d:fine CORE 4166 See the mark on the capsule d:fine CORE 4188 See the mark on the capsule d:fine CORE 4066, CORE 4266 d:fine CORE 4088, CORE 4288...
- Page 4 Adjusting the d:fine 4066 & 4088 The size of the headset mount can easily be adjusted. Change the standard bend by carefully expand- ing the distance between the earhooks. To change sides, simply click the boom out of the clips and switch it over to the other side.
- Page 5 Adjusting the d:fine 4266 & 4288 For the single-ear, just open the spring hook lightly, first place the slide behind your ear- lobe (Pic. 1) and let go of the spring over your ear (Pic. 2). For the dual-ear, place the headset behind your ears and place the springs like for the single-ear.
- Page 6 The cable relief on the dual-ear version should be fixed in the clip that also holds the two wires on the mount. Always leave the protection grid on the d:fine 4166 Omnidirectional & 4166 Directional capsules, as it protects the inner grid and...
- Page 7 Service connector to exchange cables or booms on d:fine 4166, 4266, 4188 and 4288 Headsets These d:fine Flex Headset Microphones offer exchange of cables or microphone booms. Simply locate the service access point, pull back the small locking cap and gently pull the boom away from the cable hanger.
- Page 8 Protection cap Clothing clip for d:fine 4266 & 4288 Head- The d:fine 4166 Omnidirectional & 4188 Di- set types rectional Microphones come with a red plastic The supplied clothing clip allows you to at- cap which serves to protect the microphone...
-
Page 9: Cable Maintenance
To provide users with safe and compact mounting of connec- up in soft figure-of-eight loops (preferably 6-8 cm (2.5-3 in) diameter) and avoid kinks tors, all headsets from DPA are fitted with the MicroDot con- in the cable. nector as standard. A broad range of connection adapters is... - Page 10 Frequency Response of d:fine Polar Pattern of d:fine 4166 Omnidirectional types 4166 Omnidirectional types 5 dB 20 Hz 1 kHz 4 kHz 8 kHz 16 kHz 20 kHz 1 kHz 2 kHz Polar Pattern d:fine 4188 Directional types Frequency Response of d:fine...
- Page 11 Frequency Response (d:fine Polar Pattern (d:fine 4066 & 4266 Omni Headset types) 4066 & 4266 Omni Headset types) 80 Hz 125 Hz 250 Hz 500 Hz 1 kHz 20 kHz 8 kHz 2 kHz 16 kHz 4 kHz Frequency Response (d:fine 4088 &...
- Page 12 Power supply (for full performance) Directional characteristics Power supply (for full performance) Omnidirectional Min. 5 V - max. 50 V through DPA adapter for Cardioid Min. 5 V - max. 50 V through DPA adapter for Principle of operation wireless systems.
- Page 13 d p a m i c r o p h o n e s . c o m / d f i n e...