Related Manuals for DPA d:fine
Summary of Contents for DPA d:fine
- Page 1 User’s Manual DPA d:fine Headset microphone, single-ear w w w . d p a m i c r o p h o n e s . c o m...
- Page 2 This marking should always point towards the mouth. Microphone booms and earhooks steel (see arrows). Position the cable as shown on the picture How to mount DPA d:fine Headset microphone Sweat stop for securing the position of the microphone. Service point for exchange of cables or booms...
- Page 3 Protection cap Clothing clip Frequency response d:fine Omni Headset Microphone DPA d:fine Headset microphone comes with a red plastic cap which The supplied clothing clip allows you to attach the cable to your clothes serves to protect the microphone head when putting on make-up, to relieve the cable draw to the Headset microphone. hairspray and more. Remove the cap before use. 20 Hz 1 kHz Maintenance DPA d:fine Headset microphone is resistant to high levels of humidity. Color codes and cable steer However, care must be taken to keep the Headset microphone away from Frequency response exposure to water and cleaning fluids, and to keep the microphone head d:fine Directional Headset Microphone dry at all times. Do not use spray or fluid containing chemicals that could remove static electricity on or close to the microphone.
- Page 4 -40 °C to 45 °C (-40 °F to 113 °F) Max. SPL, peak before clipping -40 °C to 45 °C (-40 °F to 113 °F) Power supply (for full performance) Relative Humidity (RH) 144 dB Relative Humidity (RH) Min. 5 V - max. 50 V through DPA adapter for Up to 90% Power supply (for full performance) Up to 90% wireless systems. 48 V phantom power +/- 4 V Min. 5 V - max. 50 V through DPA adapter for with DAD6001-BC XLR adapter wireless systems.