Advertisement
Quick Links
Advertisement
Related Manuals for DPA d:fine CORE 6066 Series
Summary of Contents for DPA d:fine CORE 6066 Series
- Page 1 6066 Subminiature Headset...
- Page 2 Introduction The d:fine CORE 6066 Subminiature Headset Microphones provides a natural and open sound. Ultra-lightweight and adjustable, these headset mics ensure a secure and comfortable fit in live performance environments. To ensure optimal performance of your 6066 Subminiature Headset Microphone, please follow the simple instructions in this manual. The 6066 Subminiature Headset sports a completely redesigned, lightweight, one-size-fits-all headset.
- Page 3 Technically advanced mechanical construction The new one-size-fits-all headset is the most advanced construction on the market. It ensures comfort, even during long-term wear, but does so without sacrificing security. Its form grips gently and snuggly around the head and is easily adjustable. The spring mechanisms that grip around the ears are gentle, yet firm enough for you to feel secure during your performance.
- Page 4 Adjusting frame size The frame is one size fits all with a Moving the guides towards each other simple adjustment mechanism for quick will enlarge the frame and moving and easy resizing. Move the ‘frame them away from each other will make guides’...
- Page 5 Adjusting boom length Release the sliding lock by gently pulling Gently pull (to shorten) or push (to Move the sliding lock back on the ear it away from the ear grip. There is a lengthen) the boom pole to the desired grip to secure the desired position.
- Page 6 Adjusting boom height The boom pole can be pivoted up and While holding the frame in one hand, down at a fixed point below the ear gently move the boom pole up or down (without bending the boom). with your other hand.
- Page 7 Adjusting ear grips This headset relies on a 3-point ear To adjust the ear grips further, press and gripping system – adding a support area gently bend them. behind the ear pressing gently inward.
- Page 8 Flip boom (left to right side) Detach the boom pole from the ear (starting at the back and tipping Move the cable to the other side of the grip by gently pulling the boom down forward). cable guide.
- Page 9 Flip boom Move the boom pole to the other Release the sliding lock and turn the oval and can only be locked in two posi- side and reattach it by gently pushing boom pole 1800 (so it bends inwards tions – left- or right-angled. Move the tup (starting at the back and tipping towards the face) by twisting it near the sliding lock back on the ear grip.
-
Page 10: Cable Management System
90º Cable management system The cable guide can be used to move The cable guide can be moved from left – just make sure the cable isn’t pulled the cable out of sight (for instance, hid- to right on the frame too tight when you slide the guide. - Page 11 Disconnecting the service connector For service purposes only! For service purposes (replacing boom First remove the protective cover and – then firmly pull the metal parts from or cable) disconnect the cable from the each other at the seam. boom at the service connector.
- Page 12 Placement of microphone DUA9531-B DUA9531-F (3 pcs. of relevant color included) DUA9501 (included) We suggest that you expand the frame The microphone capsule is correctly The enclosed windscreens offer and then place it on your head before positioned when it sits close to (but not additional protection against wind and adjusting it to the correct size.
-
Page 13: Specifications
Specifications Directional pattern Sensitivity, nominal ±3 dB at 1 kHz Max. SPL, peak before clipping Omnidirectional 6 mV/Pa; -44 dB re. 1 V/Pa 144 dB Cartridge type Equivalent noise level, A-weighted Connector Pre-polarized condenser Typ. 26 dB(A) re. 20 µPa MicroDot, TA4F, LEMO and MiniJack Frequency range Total harmonic distortion (THD) -
Page 14: General Maintenance
General maintenance DUA9301-B (optional) DUA9301-F (optional) The grid protects the tiny 3 mm capsule. The mic cap can easily be removed The orange, protective cap shields the The tiny grid holes add to the mics’ for cleaning by pulling it gently. When mic head when putting on make-up, resilience to water and sweat. - Page 15 The cable is usually longer than required. Make sure that excessive cable is wound up in soft figure-of-eight loops (preferably 6-8 cm (2.5-3 in) diameter) and avoid kinks in the cable. Use organic oil (e.g. olive oil) or lukewarm distilled water to remove residue from tape, glue or makeup on the cable.
- Page 16 If you are not satisfied with the characteristics exhibited by This product conforms to all relevant directives approved by limited warranty. this product, please contact your nearest DPA Microphones the European Commission. representative for support. Product features and specifications are subject to change without notice.