Page 2
Place the in-ear plug in the ear one of two ways Wind excess cable around the in-ear plug.
Page 3
Lengthen headset mount: 1. Hold cable lock and draw cables to create excess: 2. Draw the ear hooks away from each other to the desired sizes: Shorten headset mount: 1. Draw small coils on headset mount away from each other to the desired size 2.
Page 4
The microphone cable can be changed independently of the headset mount. Dis- mount the microphone boom and open the cable lock to release the microphone Specifications, In-Ear cable. Connector 3.5 mm stereo Mini-Jack. Single In-Ear: Signal at Mini-Jack Tip Dual In-Ear: Signal at Mini-Jack Tip (Left – micro- phone boom side) and Ring (Right) Type Dynamic earplug...