Table of Contents
Advertisement
Caring for your monitor
Detaching the monitor stand
Wall Mounting (Optional)
Refer to the instructions that come with the VESA compatible base mounting kit.
Be sure to turn off the power before you perform any maintenance on the
monitor.
Do not:
Apply water or liquid directly to your monitor.
●
Use solvents or abrasives.
●
Use flammable cleaning materials to clean your monitor or any other
●
electrical equipment.
Touch the screen area of your monitor with sharp or abrasive items. This
●
type of contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives.
●
This may harm the coating of the screen area.
Do:
Lightly dampen a soft cloth with water and use this to gently wipe the
●
covers and the screen.
Remove grease or finger marks with a damp cloth and a little mild
●
detergent.
1. After placing the monitor face down on a clean surface or soft cloth, Press the release
button to remove the stand and base from the monitor
1. Place the monitor face down on a non-abrasive surface on stable flat table.
2. Remove the stand.
3. Attach the mounting bracket from the wall mounting kit to the monitor.
4. Mount the monitor on the wall by following the instructions that come with the
base mounting kit.
NOTE: For use only with UL and GS Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 6.00 kg. In order to fulfil TCO Certification for this
wall mounting option, shielded power cable is mandatory to be used.
Chapter 2. Adjusting and Using your monitor 3-8
Hide quick links:
Advertisement
Table of Contents
