Raco Catalyst Addendum To Owner's Manual page 18

The RACO IPConfig tool runs independently of Alarmware and search the network to find the RACO
Autodialers that are present in the network.
The RACO IPConfig program can be downloaded at racoman.com website
window will be opened (see image below)
Figure 15 The RACO IPConfig tool.
The program scans the network for RACO Gateway Ethernet modules. The settings can be configured manually
or the DHCP function can be used. For the RACO Gateway Ethernet modules DHCP is activated by default. To
change the settings manually, double click on the desired module and enter the desired IP-settings as seen below.
Note: The RACO IPConfig tool is able to locate all the RACO Ethernet Autodialers in the network. There is no
need to have the Autodialers in the same subnet to be discovered.
Figure 16 Configuring the IP settings.
Saved: 2014-06-18
Filename: Catalyst Ethernet Addendum 1 1 V1_5 released
RACO Manufacturing and
Engineering
1
. Start the program and the main
Page 18 (21)