Raco Catalyst Addendum To Owner's Manual page 11

Then add the Ethernet I/O module. Right click on the I/O configuration directory in the navigation list to the left
as seen below.
Figure 3 Adding the Ethernet module.
Click on new module and select the desired Ethernet module, in this case the Ethernet Bridge. This module is the
scanner module in the PLC.
Figure 4 Selecting the type of module.
Saved: 2014-06-18
Filename: Catalyst Ethernet Addendum 1 1 V1_5 released
RACO Manufacturing and
Engineering
Page 11 (21)