Preparing Your Device - Lenovo PHAB2 Plus Manual

Preparing your device

You can use cellular services by inserting the Micro-SIM card or Nano-SIM card provided
by your carrier.
Install the SIM cards and the microSD card as shown.
Step 1. Insert the eject tool that comes with your device into the hole in the
card tray.
Step 2. Pull out the card tray and do one of the following:
Position a Micro-SIM card in Slot 1 and a microSD card in Slot 2;
Position a Micro-SIM card in Slot 1 and another Nano-SIM card in
Slot 2.
Step 3. Carefully insert the tray with the installed cards back into the slot.
Micro-SIM and Nano-SIM cards work with your device.
Only FAT32 microSD card work with your device. You might need to format
microSD card of other type before using it with the instructions on the screen
Do not insert or remove the SIM card while your device is on. Doing so can
permanently damage your SIM card or device.