Led Throw - Sunbeam Imperial Court User Manual

Warming blankets
Table of Contents

Advertisement

Features:
• 3 TEMPERATURE SETTINGS – select your personal
comfort level
• SILENT OPERATION – no clicking
• SOLID STATE – for accurate and consistent heat control
Auto-off
• EASY OPERATION – electronic controller for easy
control
operation
• EASY GRIP – ergonomic control for easy operation
• AUTO-OFF – 3 hour independent auto-off

LED Throw

CAUTION: Do not plug main power cord into the wall outlet until you have completely set
up your warming blanket per the instructions.
IF YOU DO NOT FOLLOW THIS SEQUENCE, THE WARMING THROW WILL NOT WORK.
• Disconnect power cord from wall before detaching control from warming blanket
• Always make sure cords are NOT trapped or pinched between furniture, walls or chairs.
3
Power Cord
Control
Flag Tag
1
2
Label
Module
Throw Cord
Connector
Throw Cord
14
Using your Warming Throw Control:
1 To turn the throw on simply press the round gray button. The
indicator light will glow, depending on which setting the warming
throw is set, and the warming throw will begin to warm.
CAUTION: ALWAYS turn the warming throw "OFF" and
disconnect the power cord from the outlet when not in use.
2 To turn the warming throw OFF simply press the round gray button
through the different settings until the temperature setting lights
are not glowing.
Set Up
WARMING THROW
2
When setting up your warming throw, be sure to follow the steps
below in order.
1 Locate the warming throw's information label, located near the
IMPORTANT
module.
2 Firmly plug the warming throw cord into the module until the
plastic hinges on each side click into place.
CAUTION: Cord must be COMPLETELY CONNECTED. A risk of fire
could result from a loose connection.
3 Plug warming throw power cord into a 110-120 volt wall outlet.
CAUTION: This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electrical shock, this plug is intended to fit only one
way into an outlet. If the plug does not fit in the outlet, reverse the plug. Do not attempt to
force the plug.
3
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents