Table of Contents
Advertisement
This chapter gives information about troubleshooting your Mobile Broadband Router MBR814X.
After each problem description, instructions are provided to help you diagnose and solve the
problem. For the common problems listed, go to the section indicated.
•
Is the router on?
•
Have I connected the router correctly?
Go to
"Basic Functioning" on page
•
I can't access the router's configuration with my browser.
Go to
"Troubleshooting the Web Configuration Interface" on page
•
I've configured the router but I can't access the Internet.
Go to
"Troubleshooting the ISP Connection" on page
•
I can't remember the router's configuration password.
•
I want to clear the configuration and start over again.
Go to
"Restoring the Default Configuration and Password" on page
Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
1. When power is first applied, verify that the Power LED is on (see
on page 2-5
for an illustration and explanation of the LEDs).
2. Verify that the Test LED lights within a few seconds, indicating that the self-test procedure is
running.
3. After approximately 10 seconds, verify that:
a. The Test LED is not lit.
b. The LAN port LEDs are lit for any local ports that are connected.
c. The WAN port LED is lit.
8-1.
v1.0, January 2006
Chapter 8
Troubleshooting
8-3.
8-4.
8-7.
"The Router's Front Panel"
8-1
Advertisement
Table of Contents
Troubleshooting
