How To Configure Wpa-Psk - NETGEAR MBR814X Reference Manual

Reference Manual for the Mobile Broadband Router MBR814X
7. Select the radio button for the key you want to make active.
Be sure you clearly understand how the WEP key settings are configured in your wireless
adapter. Wireless adapter configuration utilities such as the one included in Windows XP only
allow entry of one key which must match the default key you set in the MBR814X.
8. Click Apply to save your settings.
Note: When configuring the router from a wireless computer, if you configure WEP
settings, you will lose your wireless connection when you click Apply. You must
then either configure your wireless adapter to match the router WEP settings or
access the router from a wired computer to make any further changes.

How to Configure WPA-PSK

Note: Not all wireless adapters support WPA. Furthermore, client software is required on
the client. Windows XP and Windows 2000 with Service Pack 3 do include the
client software that supports WPA. Nevertheless, the wireless adapter hardware
and driver must also support WPA. Consult the product document for your wireless
adapter and WPA client software for instructions on configuring WPA settings.
To configure WPA-PSK, follow these steps:
1. Log in at the default LAN address of http://192.168.0.1, with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
2. Click Wireless Settings in the Setup section of the main menu of the MBR814X.
3. Choose the WPA-PSK radio button. The WPA-PSK menu will open.
4. Enter the pre-shared key in the Passphrase field.
5. Click Apply to save your settings.
4-12
v1.0, January 2006