Advertisement
Bluetooth Hands-free phone
Operating the system by using a voice command
By following voice guidance instructions output from the
speaker, voice commands can be given to allow for the
operation of the hands-free phone system without checking
the display or operating a button or a knob.
■Operation procedure when using a voice command
Press the talk switch on the steering and say the
command for a desired function.
■Auxiliary commands when using a voice command
The following auxiliary commands can be used when
operating the system using a voice command:
Cancel:
Exits the hands-free phone system
Repeat:
Repeats
instruction
Go back:
Returns to the previous procedure
Help:
Reads aloud the function summary if a help
comment is registered for the selected function.
Note: For the buttons on the steering, see STEERING
AUDIO SWITCH image on the previous page.
the
previous
voice
guidance
■Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary
to register a Hands-free phone in the system. The phone
registration mode will be entered automatically when
starting the system with no Hands-free phone registered.
1.
Press the OFF-HOOK or the TALK switches on the
steering. The introductory guidance and phone name
registration instructions are heard.
2.
Register a phone name by either of the following
methods.
a.
Select "Record Name" by using TUNE-SCROLL
knob.
b.
Press the talk switch and say a name to be
registered.
A voice guidance instruction to confirm the input is heard.
3.
Select "Confirm" by using a voice command or
TUNE-SCROLL knob.
A passkey is displayed and heard, and a voice guidance
instruction for inputting the passkey into the Hands-free
phone is heard.
4.
Input the passkey into the Hands-free phone.
Refer to the manual that comes with the Hands-free
phone for the operation of the phone.
Guidance for registration completion is heard.
Advertisement
