Specifications; Led Indicators; Sd Card Slot; Buttons - Axis P3374–V User Manual

AXIS P33 Network Camera Series

Specifications

Specifications
To find the latest version of the product's datasheet, go to the product page on axis.com and locate Support & Documentation.

LED indicators

Note
Status LED
Unlit
Green
Amber
Amber/Red

SD card slot

NOTICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see axis.com

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See How to reset to factory default settings on page 19.
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.

Connectors

Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
Audio connector
The Axis product has the following audio connectors:
• Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal.
• Audio out (green) – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an
active speaker with a built-in amplifier. It is recommended to use a stereo connector for audio out.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
22