About Applications - Axis P3374–V User Manual

AXIS P33 Network Camera Series
Setup
How to detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see page 23.
1. Go to Settings > System > I/O Ports and enable Supervised I/O.
Create an action rule:
1. Go to Settings > System > Events and create an action rule.
2. Type a name for the action rule.
3. From the list of triggers, select Input Signal and then Digital input port. Select Input 1 and set Tampered to Yes.
4. From the list of schedules, select Always.
5. From the list of actions, select Send Notification and then select a recipient or create a new recipient.
6. Click OK.

About applications

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications
To find the user manuals for Axis applications, go to axis.com
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
18