Table of Contents
Advertisement
22
www.electrolux.com
Problem
The oven does not heat up. The door is not closed cor-
The oven does not heat up. The fuse is blown.
The lamp does not operate. The lamp is defective.
The display shows an error
code that is not in this ta-
ble.
Steam and condensation
settle on the food and in the
cavity of the oven.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
14. INSTALLATION
WARNING!
Refer to Safety chapters.
Possible cause
rectly.
There is an electrical fault.
You left the dish in the oven
for too long.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
14.1 Lifting the appliance
To lift the appliance, do not use the door
handle.
Remedy
Fully close the door.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Replace the lamp.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
Advertisement
Table of Contents
