Checking For Proper Operation - Gemtek Systems CPE7000 Quick Installation Manual

CPE7000 Outdoor Dual Mode - Quick Installation Guide

Checking for Proper Operation


Verify data connectivity by sending a ping command to the BTS or by connecting to the Internet.

Check the LED functionality according to the following table:
LED Name Location
LED list
Main Power
Ethernet Status
SIM status
4G Status LED : Link Status
4G-1
4G-2
4G-3
Color LED Behavior
ON
Blue
OFF
Steady ON
Yellow Blinking
OFF
Steady ON
Green Blinking when On-hook
OFF
After power on, LED color will indicate different link status
as below:
Red Steady ON
Red/ Yellow Steady ON
Red/Yellow/Green Steady ON
Status Indication
Power On
Power Off
Ethernet connected
Data transmission
No Ethernet action
SIM Detected
PUK / PIN Code
No SIM Detected
CINR < 8dB
8dB < CINR < 24dB
CINR >= 24dB