Connecting The Cables - Gemtek Systems CPE7000 Quick Installation Manual

CPE7000 Outdoor Dual Mode - Quick Installation Guide

Connecting the Cables

<Figures 2> demonstrates how ODU Device connected. Be sure RJ-45 and telephone line are well connected to ODU Device.
• Using a phone line to connect the telephone with RJ-11 port.
• Available for other device such as PC/Hub/Switch connected to LAN port.
2. One RJ-11 phone cable (not
included) for connecting Phone
CAUTION
Do not connect the data equipment to the PoE port, as it supplies DC power to the ODU, and this may
!
harm other equipment connected to it.
Figure 2: CPE Connections
1. CAT 5 (or Cat5E) Outdoor Shielded Patch Ethernet
cable (not Included) for connecting POE