Gps Report; Advanced Operations; Emergency Calls - Kenwood TK-7360 Instruction Manual

Vhf fm transceiver / uhf fm transceiver
Hide thumbs Also See for TK-7360:
Table of Contents

Advertisement

3 In Selcall mode, press
• You can also enter the station ID directly by using the keypad.
4 Press S to enter Short Message mode.
5 Press
/
to select a character to enter.
6 Press C> to accept the entered character and move the cursor to the right.
• Press A or # to delete an incorrect digit. Press and hold A or # to delete all digits.
7 Repeat steps 5 and 6 to enter the entire message.
• Short messages can contain a maximum of 48 characters.
8 Press the PTT switch or
GPS R
EPORT
If a GPS unit (NMEA-0183 format) is installed on your transceiver, you can press
the key programmed as Send the GPS data to send your location data.
E
C
MERGENCY
ALLS
If your transceiver has been programmed with the Emergency function, you can
make emergency calls.
1 Press and hold the key programmed as Emergency.
• Depending on the delay time programmed into your transceiver, the length of time
you must hold the Emergency key will vary.
• When the transceiver enters Emergency mode, the transceiver will change to the
Emergency channel and begin transmitting based on how the transceiver is set up.
2 To exit Emergency mode, press and hold the Emergency key again.
• If the Emergency mode completes the preset number of cycles, Emergency mode
will automatically end and the transceiver will return to normal.
Lone Worker Mode
Lone Worker Mode is a safety feature built into the transceiver. If the
transceiver is not operated for a pre-programmed period of time, the
transceiver will emit a tone and automatically enter Emergency operation.
Operating any key will reset the timer.
Press and hold the key programmed as Lone Worker to toggle the Lone
Worker function ON or OFF.
• Depending on the delay time programmed into your transceiver, the length of time
you must hold the Lone Worker key will vary.
• "L-WK ON" momentarily appears on the display when Lone Worker is activated.
/
to select the ID of the station you want to call.
to send the message.

ADVANCED OPERATIONS

13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tk-8360Tk-7360hTk-8360hTk-7360hvTk-8360hu

Table of Contents