Raymarine axiom pro 9 RVX Installation Instructions Manual page 301

Settings
Bearing mode
System Datum
Variation
Manual variation
Advanced tab
Settings
Maximum RPM
Custom RPM Red
zone
Wind angle
response
Wind speed
response
Page settings tab
Settings
Data Overlays
Edit split ratio
Dashboard app
Description
Determines how bearing and heading data is
displayed.
Determines the datum used by your MFD.
This should be set to the same datum used by
your paper charts.
When set to Auto the MFD will automatically
compensate for the naturally occurring offset of
the Earth's magnetic field.
When variation is set to Manual you can specify
an offset.
Description
You can select a maximum RPM for your engine
dials, or allow the system to automatically
configure the Maximum RPM.
You can create a custom Red zone for your RPM
dials.
You can configure the rate at which Wind angle
data is updated on the MFD.
The Higher the response setting the faster the
update rate will be.
You can configure the rate at which Wind speed
data is updated on the MFD.
The Higher the response setting the faster the
update rate will be.
Description
Enables configuration of Data overlays
Enables you to customize the position of the partitions in
splitscreen app pages.
Options
• True
• Magnetic
List of available datums.
• Auto
• Manual
• 30° W to 30° E
Options
• Auto
• 3,000 RPM to 10,000
RPM
• 0 RPM to 10,000 RPM
• 1 to 15
• 1 to 15
135