Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-XA34 Operating Instructions Manual

Notes
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
• When both the S VIDEO and VIDEO IN 1 input are connected, the
• Do not connect video equipment to the VIDEO 3 INPUT jacks at the front
• When no signal is input from the connected video equipment, the TV
Step 2
Insert the batteries into
the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Front panel
3
3
AUTO
PROGR
Tips
• To stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
yellow jack) and the black plug to AUDIO-L (MONO)
(the white jack).
output from the VCR to the program number 0 on the TV.
S VIDEO input is automatically selected. To view the video input to
VIDEO IN 1, disconnect the S video cable.
and VIDEO IN 3 (video input) jack at the rear of your TV at the same time;
otherwise the picture will not be displayed properly on the screen.
screen becomes blue.
1
POWER
2
1
channel, then preset your TV manually (see page 10).
VOL CH
CABLE AUTO PROGR ADD/ERASE
2 3
1
Using Your New TV
5