Sony Trinitron KV-XA34 Operating Instructions Manual page 8

Connecting optional components (continued)
Connecting a DVD player using the COMPONENT VIDEO
(DVD) IN jacks
1 Using an audio cable, connect R and L under the COMPONENT VIDEO (DVD) IN
jacks on your TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
2 Using a component video cable, connect Y, C
VIDEO (DVD) IN jacks on your TV to the COMPONENT VIDEO OUT Y, C
C output connectors on your DVD player.
R
3 Press VIDEO on the remote or TV/VIDEO on the TV until "DVD" appears on the
screen.
DVD player
COMPONENT VIDEO OUT S VIDEO OUT
C C Y
R B
To audio
output
To component
video output
8
Using Your New TV
LINE OUT
R-AUDIO-L
VIDEO
Audio cable
(not supplied)
Component video cable
(not supplied)
Notes
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to
input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz
interlace signals.
• Some DVD player terminals may be labeled differently:
Connect To (on the DVD player)
Y (green) Y
C (blue) C , B-Y or P
B b
C (red) C , R-Y or P
R r
• When connecting to the COMPONENT VIDEO (DVD) IN jacks on your
TV, you must connect Y, C
connect L and R to receive analog audio signals.
, and C under the COMPONENT
B R
COMPONENT VIDEO(DVD) IN
R L Y C C
B R
To COMPONENT VIDEO
(DVD) IN
B
R
, and C to receive the video signals, and
B R
, and
B
Rear of TV
: Signal flow
(component video